Yamaha MGP32X Firmware Update Manual

Hide thumbs Also See for MGP32X:

Thank you for choosing a Yamaha product.

This guide explains how to update the MGP32X/MGP24X firmware.

■ Precautions (Please be sure to read this section first!)

・ The user assumes full responsibility for the update.

・ Please note that the device may be damaged if you fail to follow these instructions properly,

or turn off the device or remove the USB storage device while the update is in progress.

・ If the update fails, and the device still does not operate correctly even after you execute the

update once again, please contact your Yamaha dealer.

・ Yamaha Corporation owns exclusive copyrights for the MGP32X/MGP24X firmware, its

update program, and the update guide.

・ It is prohibited to duplicate or modify the firmware, software or guides, in part or in their

entirety, without permission from the copyright owner.

・ The screen shots in this guide are for use with this update procedure only and may be

different from the actual screen shots.

・ The company names and product names in this document are the trademarks or registered

trademarks of their respective companies.

MGP32X/MGP24X

Firmware Update Guide

MGP32X/MGP24X Firmware Update Guide

Table of Contents

Need help?

Do you have a question about the MGP32X and is the answer not in the manual?

Page 1 ・ If the update fails, and the device still does not operate correctly even after you execute the update once again, please contact your Yamaha dealer. ・ Yamaha Corporation owns exclusive copyrights for the MGP32X/MGP24X firmware, its update program, and the update guide.
Page 2 1. Make sure you have a USB storage device (formatted on computer in FAT32 format) and a computer with a built-in USB connector. 2. Download the latest firmware of the MGP32X/MG24X from the Yamaha Pro Audio website. (This is not necessary if you have already downloaded the firmware together with this document.)
Page 3 3. Press Knob 2 to start writing the main program. Caution: Do not remove the USB storage device or power-off the MGP32X/MGP24X while accessing the USB storage device. ① When reading of the program data from the USB storage device starts, the message shown below appears on the display (for about 10 minutes).
Page 4 Confirm that the main program version is the same as the one you loaded. The following example screen is from version 1.0. This completes the update procedure of the MGP32X/MGP24X firmware. Yamaha Corporation, All Rights Reserved. © 2013 Yamaha Corporation...

Mgp24x