Using Graphic Eq; About The Graphic Eq (Geq); Setting The Geq - Yamaha MGP32X Owner's Manual

Using Graphic EQ

About the graphic EQ (GEQ)

Graphic EQ processing is inserted into the STEREO bus (L/R).
You can select the 14bandGEQ or the Flex9GEQ. The Flex9GEQ
lets you adjust the gain by selecting up to nine bands from the 31
frequency bands.

Setting the GEQ

In the initial state, the GEQ is set to ON, and the "Type" of GEQ
is set to 14bandGEQ.
1.
Press the GEQ button below the display
repeatedly if necessary until the GEQ MODE
page appears.
Knob 1
2.
Rotate Knob 1 to select "GEQ ON," and then
rotate Knob 2 to set to "ON."
3.
Rotate Knob 1 to select "Type," and then rotate
Knob 2 to set to "14BandGEQ" or "Flex9GEQ."
If you select a different type from the current type setting, the
parameter value flashes.
4.
Press Knob 2 while the parameter value is
flashing.
The screen prompts you to reset the gain because the parame-
ters of 14BandGEQ and Flex9GEQ are not compatible.
5.
Press Knob 2 to select "OK," or Knob 1 to can-
cel.
The GEQ type will be changed.
28
MGP32X/MGP24X Owner's Manual
 Setting the frequency and gain
1.
Press the GEQ button below the display
repeatedly if necessary until the EDIT page
appears.
If the "L/R Link" is set to "ON," the "EDIT L/R" page
appears. If the "L/R Link" is set to "OFF," the "EDIT Lch"
page or "EDIT Rch" page appears.
Frequency
Frequency
2.
Rotate Knob 1 to move the cursor to the
Knob 2
desired frequency.
"F" in the screen indicates frequency. For example, F=1.25k
indicates a frequency of 1.25kHz.
3.
Rotate Knob 2 to determine the frequency
gain.
"G" in the screen indicates gain. For example, G=4.5 indi-
cates a gain of +4.5dB.
After you make the settings, it is convenient to save these set-
tings to one of the user programs (page 30).
Resetting the selected frequency gain
Press and hold Knob 1 for at least two seconds.
Resetting the gain of all frequencies
1.
Press Knob 1 and Knob 2 together.
The confirmation message "Reset GEQ Gains?" appears.
2.
Press Knob 2 to select "OK," or Knob 1 to can-
cel.
All frequency gains will be reset.
14BandGEQ
Flex9GEQ
Gain
Gain