Connect Peripheral Equipment - Philips FTR9952 Owner's Manual

(,VCR with other A/V peripherals (except Photo CD) )
Q
ANTEN_
CABLE'
] 2 1
r_ 7 _ _
,_o
Iq I .....Do-o
_I I o ...... ®-0-o _=o
I j 0-2o_ ®- 0-0- OL,o
O--,--@-O-O-O-,
J IN
r_ ..... ......
® ®
/
ii Z!!E¸ 7
0 O0 O0
0
0
Interconnect yourVCR with an extra RF cable (_).
To obtain better picture quality, also connect the Video, Audio left and Audio
right (only for stereo equipment) cables to the VIDEO, AUDIO L and AUDIO
R inputs of the A/V IN t or AN IN 2 sockets.
If yourVCR has an S-VHS video jack:
For improved picture quality, connect a S-video cable with the S-VIDEO input
on the receiver instead of connecting the VCR to the VIDEO jack of A/Vt
IN or A/V2 IN.
S-Video does not provide audio, so audio cables must still be connected to
provide sound.
When d video recorder is NOT conne_ed to VIDEO OUTyou can only record a
program from the aerial or from the cable system.
Only when a VCR is connected 1.oVIDEO OUTit _spossible to record a program from
other equipment connected to the receiven(See Record with your VCR,p. 27,)
Note:Air1 tN and AIV2can handle CVBSand YtC;AtV3IN CVBS and RGB,
A/V4(FRONT) C VBSand YIC
(,Camera & camcorder )
O Connect your camera or camcorder at the front side of your receiver (A/V4).
O Connect the equipment to VIDEO (_) and AUDIO L (_) for mono
equipment.
For stereo equipment also connect AUDIO R (_).
S-VHS quality with an S-VHS camcorder is obtained by connecting the S-VHS
cables with the S-VHS input (_) and AUDIO inputs (_).
Connect Peripheral equipment 21