Connect Peripheral Equipment; Connecting And Selecting Equipment; Video Recorder - Philips TV User Manual

Tv
Hide thumbs Also See for TV:
Table of Contents

Advertisement

CABLE
2
EXTERNAL
1
2
3
4
VCR 1
CABLE
EXTERNAL
1
2
1
4
2
VCR 1

Connect Peripheral Equipment

There is a wide range of audio and video equipment that can be connected
to your TV.The following connection diagrams show you how to connect
them.

Video recorder

Connect the aerial cables 1, 2 and, to obtain the optimum picture quality,
eurocable 3 as shown opposite.
If your video recorder is provided with the EasyLink function, the eurocable supplied
with it, should be connected to
functionality.
If the eurocable 3 is not used the following steps are required:
Search for and store the test signal of the video recorder
&
Unplug the aerial cable 1 from the aerial socket x of your video recorder.
é
Switch on your TV and put the video recorder on the test signal.
(See the handbook for your video recorder.)
"
Search for the test signal of your video recorder in the same way as you
searched for and stored the TV signals. See Installation, Searching for and
storing TV channels, Manual Installation, p. 5.
'
Store the test signal under programme number 0 or between 90 and 99.
(
Replace the aerial cable in the aerial socket x of your video recorder after
you have stored the test signal.
Decoder and video recorder
Connect a eurocable 4 to your decoder and to the special euroconnector
of your video recorder. See also the video recorder handbook.
See Define Decoder/Descrambler prog. numbers, p. 7.
You can also connect your decoder directly to
eurocable.
Video recorder and other peripherals
&
Connect the aerial cables 1, 2 and 3 as shown opposite. Better picture
quality can be obtained if you also connect eurocable 5 to
and a eurocable 4 to
é
Look for the test signal of your peripheral in the same way as you do for
a video recorder.
3
When a video recorder is connected to
programme from your TV.
5
Only when a video recorder is connected to
record a programme from your TV as well as from other connected
equipment. See Record with your video recorder, p. 31.
Note:
EXTERNAL 2
EXTERNAL 1
can handle CVBS and RGB,
EXTERNAL 1
only CVBS.
EXTERNAL 3
Connect Peripheral Equipment
to benefit from the EasyLink
or
EXTERNAL 1
2
(except Digital Sources)
EXTERNAL 2
or
.
3
you can only record a
EXTERNAL 1
it is possible to
EXTERNAL 2
CVBS,Y/C and RGB,
EXTERNAL 2
with a
25

Advertisement

Table of Contents
loading

Table of Contents