Philips FTR9952 Owner's Manual page 20

Change Access Code
This function allows you to create or change a Personal identification
Number or access code in the menu.
Select Change Code in the LOCK menu with the cursor down.
Press the OK key to enter the menu.
Enter a new codenumber with the digit keys,
All number combinations from 0000 to 9999 are valid numbers (except
0711),
O When a correct number has been entered, confirm it again.
The message New code saved appears.
Enter Access Code
If aTV channel orAN source has been blocked, the picture and sound are
muted and the ENTER CODE menu appears on the screen,The menu items
give an overview of the received ratings.You are asked to enter your access
code.
If the access code is correct, the menu disappears and the picture and sound
are demuted until the receiver is turned off.
No_e:When the ENTER CODEmenu Js on the screen for 5 minutes, the receiver _s
_umed off
Important:You have forgotten your code or no code has been
entered yet !
O Enter the overriding code 0711.
The message Wrong code entered appears.
Enter the code 0711 again.
The CHANGE CODE menu appears.
Enter a new codenumber (unequal 0711) with the digit keys twice.
_]_ The previous code (if there was one already) is erased and the new one is
stored.
Note: the overriding code
onJy works
in the Lock Access or Enter Code menu
Save Sound PP
The adjustments of Volume, Balance,Treble, Bass and Incredible Surround
made in the sound menu andVolume and Balance in the headphone menu can
be saved in memory for all the stored channels.
16 Use of the menus