Table of Contents
Advertisement
J
Connection diagrams
Amplifier
Front speakers
Rear speakers
DVD
Decoder/Descrambler
VCR1
VCR2
Antenna
CABLE
1
3
2
4
24
Connect Peripheral Equipment
•
& Select Ext2 Input in the Setup menu of the
é Select VCR or Other, according to whether you have connected a video
2
" Select VCR Type in the Setup menu.
' Select Non PALplus or PALplus according to whether you have connected
•
•
•
•
•
•
There is a wide range of audio and video equipment that can be connected
to your TV. The following connection diagrams show you how to connect it.
See also Connection diagrams in the
different connection possibilities are shown. Each time a menu item is selected
a graphic is shown of the connection. Those graphics have no operational
function.
Video recorder
Connect the aerial cables 1, 2 and, to obtain a better picture quality,
eurocable 3 as shown opposite.
If your video recorder is provided with the EasyLink function, the eurocable supplied
with it, should be connected to
Select VCR Type (only for 32" or 82 cm sets)
recorder or another peripheral to the
a Non PALplus or PALplus video recorder.
You have to do the following if you do not connect the eurocable 3,
Search for and store the test signal of the video recorder
Unplug the aerial cable 1 from the aerial socket x of your video recorder.
Switch on your TV and put the video recorder on the test signal. (See the
handbook for your video recorder.)
Search for the test signal of your video recorder in the same way as you
searched for and stored the TV signals. See Installation, Searching for and
storing TV channels, Manual Installation, p. 6.
Store the test signal either under programme number 0 or between 90 and 99.
Replace the aerial cable in the aerial socket x of your video recorder after
you have stored the test signal.
Decoder and video recorder
Connect a eurocable 4 to your decoder and to the special euroconnector of
your video recorder. See also the video recorder handbook.
See Define Decoder/Descrambler prog. numbers, p. 8.
You can also connect your decoder directly to
eurocable.
INSTALLATION
to benefit from the EasyLink functionality.
EXTERNAL 2
INSTALLATION
euroconnector.
EXTERNAL 2
EXTERNAL 1
menu where the
menu.
or
with a
2
Advertisement
Table of Contents
