Connecting Peripheral Equipment - Philips FTR9952 Owner's Manual

/
Nom
fA_l
.@®L
v@@°
,®@-
( DVD player )
O Connect the three separate component video cables to the DVD player's Y,
Cb and Cr jacks and to the Y, Cb and Cr A/V6 IN jacks on the receiver.
O Connect the audio cable to the DVD player's AUDIO L and R jacks and to
the L and RAUDIOA/V6 jacks on the receiver.
( High Definition input )
When you dispose of a Digital Antenna cable connected to a digital Set top
Box, connect the Set top Box to the A/Vs HD input.
Connect a Set top Box with Pr, Pb,Y output to the Pr, Pb and Y jacks and to
the L and RAUDIO jacks.
In case of separate horizontal and vertical sync outputs on your set top box,
connect the set top box with these outputs to the H and V jacks on the
receiver.
See also the manual of your High Definition Set top Box.
Warning: in case you notice scrolling _mages, wrong colors or no color, no picture, or
even combinations of these, on your screen, check if the connections are done in
the right wo_ Check if the cable colors mgtch with the input connector colors
i __i_ ¸¸_¸¸ _I
( Headphone )
O Insert the plug into the headphone socket ,_, at the front side of the
receiven
Press F_ to switch off the internal speakers of theTV.
The headphone impedance most be between 8 and 2000 Ohm.
The headphone socket has a 3.5 mm jack.
In the SOUND menu select Headphone to adjust the headphone volume and
balance and to select the audio source for your headphone sound. See p. 12.
Note: When a TV channel or A/V source is blocked because of a rating set v_a the
Lock menu (see p, 14-15), also the headphone is muted.
Connect Peripheral equipment 23