Philips FTR9952 Owner's Manual page 24

Connect Peripheral Equipment
There is a wide range of audio and video equipment that can be connected
to your receiver.The following connection diagrams show you how to
connect them to the back or the front side of the receiver.
(,Video recorder )
7S_
,11-
0
Note: Do not ploce ,lout video recorder too close to the screen as some video
recorders may be susceptible for signals ou[ of the displcsF
Keep o minimum distance 0f20" to the screen.
CABLE e,
_ _v ....
m....... o o-o
-_[ j o-,.,°--o-®-o _o
O-- _ -- AUDIO
I_J ..,. o-®-o-o-,
O-,--O-®-O-O,
IN
® ®
OUT
®
0
0
VCR
Connect the supplied antenna cable (D to the RF IN socket of your VCR.
Connect another RF cable _) from the output OUT of yourVCR to the
input "11"of your receiver.
Better quality when playing from yourVCR can be obtained if you also
connect theVideo, Audio Left and Right (only for stereo equipment) cables
(_) to the VIDEO, AUDIO L and R inputs A/V IN I or A/V IN 2.
The VIDEO OUT connectors on the receiver can be used for daisy chaining
or to record programs from yourT_L See Record with your video recorder,
p. 27.
If you are usingonly mono equipment, connect onlythe VIDEO and the
AUDIO L sockets.
If yourVCR has an S-VHS video jack:
For improved picture quality, connect a S-video cable with the S-VIDEO input
on the receiver instead of connecting the VCR to the VIDEO jack of A/VI
IN or A/V2 IN.
S-Video does not provide audio, so audio cables must still be connected to
provide sound.
z0 Connect Peripheral equipment