Connect Your Computer - Philips FTR9952 Owner's Manual

j _'-,
jU
.....k..) <j
0
OUT
Connect your computer )
O Connect one end of the supplied VGA cable to the video card of the
computer and the other end to the VGA MONITOR IN @) connector at the
rear side of the receiver box.
Fix the connectors firmly with the screws on the plug.
In case of a Multimedia computer, connect audio cables to the audio outputs
of your Multimedia computer and to the AUDIO MONITOR IN R (right) and
L (left) (_) above the VGA MONITOR IN connector at the back of the
receiver,
Note: Seethe instructions with the monitor in case you want to connect your
computer to the monitor:
Connect your Apple Macintosh* computer
Attention: Macintosh computers with separate H and V synchronization s_gnats
can be used together with a switchable adapto_ Macintosh computers w_th
Composite Syncand Sync on Green signals may need another special adaptor or
cable. Contact your deale_
ConnecttheswitchableadaptorforApplevideoconnectorstooneendofa
VGA cable.
Put the DIP switches on the adaptor in the following positions :
1 2 3 4
off off on on
Connect the end of the VGA cable with the adaptor to the video card of the
computer and the other end to the VGA MONITOR IN connector on the
back of the receiver box.
O Screw the connectors down firmly.
1S-pinD sub
(2-row)
15-pin mini D sub
(3-row)
To reproduce computer screen information and!or programs, see p. 25.
Apple Macintosh is a registered trademark of Apple Computer, inc.
24 Connect your computer