Preparation - Philips FTR9952 Owner's Manual

TV-
Q ®
Preparation
Do not insert the power plug in a wall socket before all connections
are made.
0
Place the receiver box wherever you want, but leave at least 2" space free all
around the box for ventilation and do not cover the ventilation openings (e.g.
on the ground, in a cupboard, behind a wall, in another room....)
To prevent any unsafe situations, do not place any objects on top of the
monitor or the receiver. No naked flame sources, such as lighted candles,
should be placed on or in the vicinity.Avoid heat, direct sunlight and exposure
to rain or water.The equipment shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, shall be placed on it.
Connect the supplied aerial cable 1_) and the VGA cable with trailing audio
cinch connectors (_ as shown on the inside frontcover of this handbook.
Make sure all screws of the cable (_) are tightened well.
connect your computer, see p.
To 24.
To connect other peripherals, see p. 20.
In order to obtain the best result, please use only the supplied antenna cables
between the receiver box and videorecorder, and between videorecorder and
antenna connector.
0
Insert the power cord supplied _) (with filter) into the MAINS INLET at the
bottom of the monitor and the power cord (_) at the back of the receiver.
Put both in the walt sockets with an AC power supply of 110V. Consult your
Iota} dealer if your AC power supply is different_
Please, only use the power cord _) (with filter) supplied with the
monitor, for the monitor, and use the power cord (_) supplied with
the receiver, only for the receiver.
Q
0
Remote control: Remove the cover of the battery compartment.
Insert the 2 AAA batteries supplied (Type R03G/AAA-1.5V).
Press the TV key to be sure your remote control is in theTV mode.
The battenes supplied do not contain the heavy metals mercury and cadmium.
Nevertheless _nmany countries dead batteries may not be disposed of w_thyour
household waste. Please dispose of dead batteries according to local regulations.
Turn theTV on : Press the power button (_) at the right side of the
monitor and the one on the front of the receiver box.
A green indicator and the screen light up.
If the indicator is red, press the - C H+ key on the remote control
The green indicator blinks every time you press a t_eyon the remote control,
When you turn on your set for the first time, the menu LANGUAGE automatically
appears on the screen.Aiterna_:elythe explanation appears in different languages
Preparation 3