Connect Peripheral Equipment - Philips 32PW9403/12 User Manual

Table of Contents

Advertisement

J
CONNECTION DIAGRAMS
Amplifier
CD-i/Photo CD
Decoder/Descrambler
VCR1
VCR2
Antenna
CABLE
1
3
2
4
CABLE
1
4
2

Connect Peripheral Equipment

2
1
2
5
3
There is a wide range of audio and video equipment that can be connected
to your TV. The following connection diagrams show you how to connect it.
See also the menu item Connection diagrams in the
where the different connection possibilities are shown. Each time a menu item
is selected a graphic is shown of the connection. Those graphics have no
operational function.
Video recorder
Connect the aerial cables 1, 2 and, to obtain a better picture quality,
eurocable 3 as shown opposite.
If your video recorder is provided with the EasyLink function, the eurocable supplied
with it, should be connected to
You have to do the following if you do not connect the eurocable 3.
Search for and store the test signal of the video recorder
Unplug the aerial cable 1 from the aerial socket x of your video recorder.
Switch on your TV and put the video recorder on the test signal. (See the
handbook for your video recorder.)
Search for the test signal of your video recorder in the same way as you
searched for and stored the TV signals. See Installation, Searching for and
storing TV channels, Manual Installation, p. 5.
Store the test signal either under programme number 0 or between 90 and 99.
Replace the aerial cable in the aerial socket x of your video recorder after
you have stored the test signal.
Decoder and video recorder
Connect a eurocable 4 to your decoder and to the special euroconnector of
your video recorder. See also the video recorder handbook.
See Define Decoder/Descrambler prog. numbers, p. 7.
You can also connect your decoder directly to
eurocable .
Video recorder and other peripherals
(except CD-i/Photo CD)
Connect the aerial cables 1, 2 and 3 as shown opposite. Better picture
quality can be obtained if you also connect eurocable 5 to
eurocable 4 to
EXTERNAL 1
Look for the test signal of your peripheral in the same way as you do for a
video recorder.
When a video recorder is connected to
programme from your TV.
Only when a video recorder is connected to
record a programme from your TV as well as from other connected
equipment. See Record with your video recorder, p. 18.
INSTALLATION
to benefit from the EasyLink functionality.
EXTERNAL 2
EXTERNAL 1
or
.
3
you can only record a
EXTERNAL 1
EXTERNAL 2
menu
or
with a
2
and a
EXTERNAL 2
it is possible to
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

32pw9523/1228pw9503/12

Table of Contents