Table of Contents
Advertisement
CABLE
EXTERNAL
1
2
3
4
CABLE
EXTERNAL
1
1
4
2
20
Connect Peripheral Equipment
2
2
3
5
VCR 1
There is a wide range of audio and video equipment that can be connected
to your TV. The following connection diagrams show you how to connect
them.
Video recorder
•
Connect the aerial cables 1, 2 and, to obtain the optimum picture quality,
eurocable 3 as shown opposite.
If your video recorder is provided with the EasyLink function, the eurocable supplied
with it, should be connected to
If the eurocable 3 is not used the following steps are required.
Search for and store the test signal of the video recorder
•
Unplug the aerial cable 1 from the aerial socket x of your video recorder.
•
Switch on your TV and put the video recorder on the test signal. (See the
handbook for your video recorder.)
•
Search for the test signal of your video recorder in the same way as you
searched for and stored the TV signals. See Installation, Searching for and
storing TV channels, Manual Installation, p. 5.
•
Store the test signal under a programme number.
•
Replace the aerial cable in the aerial socket x of your video recorder after
you have stored the test signal.
Decoder and video recorder
•
Connect a eurocable 4 to your decoder and to the special euroconnector of
your video recorder. See also the video recorder handbook.
See Define Decoder/Descrambler prog. numbers, p. 7.
You can also connect your decoder directly to
eurocable.
Video recorder and other peripherals
(except Digital Sources)
•
Connect the aerial cables 1, 2 and 3 as shown opposite. Better picture
quality can be obtained if you also connect eurocable 5 to
eurocable 4 to
EXTERNAL 1
•
Look for the test signal of your peripheral in the same way as you do for a
video recorder.
When a video recorder is connected to
programme from your TV.
Only when a video recorder is connected to
record a programme from your TV as well as from other connected
equipment. See Record with your video recorder, p. 24.
to benefit from the EasyLink functionality.
EXTERNAL 2
EXTERNAL 1
.
you can only record a
EXTERNAL 1
EXTERNAL 2
or
with a
2
and a
EXTERNAL 2
it is possible to
Advertisement
Table of Contents
