Installation The Extron P/2 DA1 is a one input, one output VGA line driver. It boosts the video signal between a laptop or desktop computer (input device) and a monitor or large screen projector (output device). Features • The P/2 DA1 accepts and outputs VGA, XGA, SXGA, RsGsBs, RGsB, RGBS, and RGBHV signals.
Nominal level ... 0.7 Vp-p for RGB Minimum/maximum levels ... Analog: 0.3 VDC to 1.5 VDC p-p with no Impedance ... 75 ohms DC offset ... ±5 mV maximum with input at 0 offset Output resolution may vary depending on whether the P/2 DA1 is attached to the computer at startup, and on the type of computer you are using.
Need help?
Do you have a question about the VGA Line Driver P/2 DA1 and is the answer not in the manual?
Questions and answers