LIFESTYLER 3500ps Owner's Manual page 8

INCLINE ADJUSTMENT
To vary the level of exercise intensity, the incline of the
treadmill can be changed using the lever on the right side
of the console. Do not adjust the incline while you are
walking or running on the treadmill. To increase the
incline of the treadmill, stand toward the rear of the foot
rails and pull back the lever. When the desired incline is
reached, release the lever. To decrease the incline, stand
toward the front of the foot rails, lean forward if neces-
sary, and pull back the lever until the desired incline is
reached. There is an incline indicator located above the
incline lever on the console. The indicator measures the
incline of the treadmill.
CONSOLE DIAGRAM
MAX SPEED SET Display
[--.PROGRAM SEGMENT Display-_
i-iM ! ' ! ! ''' 000
= = = = = = = = = =
lllllllll
rSEGMENT TIMER Display
SS_EED ADJUST Display
[==
l
II
l
_) _ r'--_ r--_
- PROGRAM START Key
-, STOP Key
Electronic Monitor
Power Switch
USER Key MANUAL Key Safety Card Clip
TURNING THE POWER ON
Stand with your feet on the foot rails on either side of the treadmill belt.
Attach the clip on the safety card to the waistband of your clothing. IMPORTANT: The clip is an
important safety feature. If you should slip while operating the treadmill, the safety card will be pulled
from the power switch, instantly turning the power off.
Insert the safety card into the power switch on the front of the console. The electronic monitor will turn
on, the indicator on the MANUAL key will light, and one bar in the SPEED ADJUST display will light.
Note: If the safety card is removed from the power switch, allow ten seconds for the microprocessor to
reboot before inserting the card again.
"ELECTRONIC MONITOR OPERATION
8 See the ELECTRONIC MONITOR OPERATION GUIDE accompanying this manual.