Water in the washer does
not drain or drains slowly
Washer does not start
Washer won't spin
Wash cycle time delayed
Musty or mildewy
odor in washer
• Drain hose is bent or clogged.
• The drain filter is clogged.
• Electrical power cord may not
be plugged in or connection
may be loose.
• House fuse is blown, circuit
breaker tripped, or a power
outage has occurred.
• Water supply tap is not turned
• Check that the door is firmly
The washing time may vary by
the amount of laundry, water
pressure, water temperature,
and other using conditions.
• Incorrect or too much
detergent has been used.
• Inside of tub not cleaned
Clean and straighten the drain hose.
Clean the drain filter.
Make sure plug fits tightly in wall
Reset circuit breaker or replace fuse.
Do not increase fuse capacity.
If problem is a circuit overload, have
it corrected by a qualified electrician.
Turn on water supply tap.
Close the door and press the
Start/Pause button. After pressing the
Start/Pause button, it may take a few
moments before the clothes washer
begins to spin. The door must lock before
spin can be achieved.
If the imbalance is detected or if the
suds removing program operates, the
wash time shall be increased.
• Use only HE (High-Efficiency)
in accordance with the manufacturer's
• Run the Tub Clean cycle regularly.
Be sure to wipe around and under the
door seal frequently.