Using And Replacing The Cooktop Light - KitchenAid KERI500 Use And Care Manual

_sing and Caring for Your Cooktop
Using and replacing the cooktop light
(on some models)
The fluorescent light is on the top of the
control panel. The cooktop light switch is on
the control panel. Press it to turn on the
cooktop light. Press it again to turn light off.,
Replacing the cooktop light:
1. Unplug range or disconnect power,
2. Flip up the top of the control panel.
If the cooktop light still does not work,
you may need to replace the starter. The
starter is a knob-shaped part located on
the right side of the backguard, under the
light bulb. To remove and replace the
starter, first remove light bulb. Push
starter in and turn approximately 900
counterclockwise. Pull starter out of re-
cessed area. You can find replacement
starters at stores that sell fluorescent
tubes.
4. Close the top panel.
5. Plug in range or reconnect power.
3. Grasp the fluorescent tube at both ends.
Turn the tube approximately 90° in either
direction until both ends come out of the
receptacles. Replace with a 20-watt cool-
white fluorescent tube.
17