Starting/Canceling A Function; Tones; Oven Settings - KitchenAid KERI500 Use And Care Manual

Using and Caring for Your Oven
Starting/Canceling a function
After setting a function, you must press the
START button to start the
function, if you do not press
START within five seconds,
"START?" will be displayed as
a reminder.
The OFF button will cancel any function
except the clock, timer, and
control lock. When you press
OFF, the display will show the
time of day or, if the minute
timer is also being used, the
time remaining.
Tones
Tones tell you if a function is entered
correctly or not. They also tell you when a
cycle 'is completed.
To shut off all tones except the end-of-
timer and error tones :
To choose between high and low volume
tones :
Press and hold STOP TIME for 5 seconds. Press and hold DELAY for 5 seconds.
A short tone will tell you the tones have been
changed. Repeat to turn the tones
back on. You will see "OFF" for 3
seconds when the tones are
turned off, and "On" for 3 seconds
when they are tumed on.
A short tone will sound to tell you the tones
have been changed. Either "HI"
or "Lo" will appear on the display
for 3 seconds to show the
volume you chose.
Oven settings
This chart tells you when to use each setting. It also explains which elements heat up for
each setting.
SE'I-rlNG DIAGRAM SE'I'rlNG INFORMATION
BAKE
Use this setting for baking
and heating casseroles.
BROIL (MAXI/ECONO)
Use this setting for broiling
regular-sized and smaller
cuts of meat, poultry, and
fish.
• The bottom element and outer top
element heat up.
• During baking, the elements will
turn on and oft to maintain the
oven temperature.
• Both top elements heat during
Maxi Broil. (Maximum browning
coverage)
• Only the inner element heats up
during Econo Broil. (Browning
coverage in center only)
21