Stitch Program Selection; Top/Deco Switch Lever - Pfaff creative 4874 Instruction Manual

Top/deco switch lever

Choose a stitch program and move the top/
deco switch lever A to the correct position:
Right for top cover, programs 21, 22 and
23.
A
Left for deco cover, programs 24 – 30.
For our example, we have chosen program
23.

Stitch program selection

Switch the machine on and select one of
the top cover programs with the program
selection buttons +/- (11). The stitch length
and differential feed will be adjusted
and the sewing speed will be slowed
automatically. For our example, we have
selected program 23, 3-needle, 4-thread
top cover.
If you hear an alarm when you make your
stitch program selection, this means that
the top/deco switch lever (A) is in the
wrong position.
3.0 1.0
The stitch length and the differential feed
are set automatically, but can be altered
and stored individually (see page 3-4).
L R
0 1 2 1 2
With the needle changing tool, insert
needles L 0, 1 and 2 as far as they will go
into the needle holder (make sure the
needles are inserted all the way with your
fi ngers). Tighten the associated retaining
screw and remove the needle changing
tool.
Top Cover Stitch
Note: If the top/deco switch
lever is not in the correct
position, the machine will not
run in programs 21 – 30 and an
alarm will sound.
Note: Always set up your
creative 4874 as shown in the
display fi rst. Then open the
program memory (see page
3-5) before threading the
machine.
5-3