Notes On The Saving To Memory; Deleting All Memories - Pfaff creative 4874 Instruction Manual

Note: If you press memory
selection button P repeatedly,
you will be returned to the
main menu.
3-6
Save
The settings for automatic thread tensions,
stitch length, and differential feed can be
changed and stored. To do this, use the
appropriate buttons +/– to change the
previous setting. In our example we have
changed the stitch length setting from 2.5
to 3.0.
By pressing memory button M you activate
memory A, which is indicated by the
fl ashing letter A. To store the changed
setting, press the memory button M again
– the fl ashing will stop and the setting will
be stored.
If the memory button M is not pressed
within 10 seconds, the letter will stop
fl ashing and the changed setting will not
be stored in the memory.

Notes on the saving to memory

If you do not select a memory to receive
the settings you want to save, the changed
settings will be stored in a vacant memory
automatically when you press memory
button M.
If all memories already contain settings,
the changed settings will not be accepted.
You cannot delete individual memories,
but you can overwrite them.

Deleting all memories

Switch the machine off. Press the program
selection buttons +/– and the memory
button M together. Hold the buttons down
and switch the machine on. After about 10
seconds, the last stitch program used on
the 4874 will appear in the display, and the
contents of all memories will be deleted.