Deco Cover
To remove the decorative thread guides,
loosen the screws with the allen key. Place
the screwdriver between the decorative
thread guide and the holder and press the
tip of the screwdriver gently forwards. The
thread guide will pop out of the holder.
Remove the blue one fi rst, and then the
yellow one.
When you press the memory selection
button P once, the program memory
opens. The thread tension values appear
beside the program number in the display.
First thread the purple thread tension
for the cover-stitch looper, followed by
the blue, green and red thread tensions
for the needles. You can also refer to the
threading diagram behind the front cover.
Finally the blue and yellow deco cover
threads are threaded.
Threading the cover-stitch looper
Turn the hand wheel towards you until the
cover-stitch looper (33) is as far to the right
as possible.
33
6-7