Pfaff creative 4874 Instruction Manual page 90

L R
0 1 2 1 2
With the needle changing tool, insert
needles L 0, 1 and 2 as far as they will go
into the needle holder (make sure the
needles are inserted all the way with your
fi ngers). Tighten the associated retaining
screw and remove the needle changing
tool.
Pull knob A of the stitch fi nger (32) to
the right and swing it down into its
disengaged position.
A
Turn the hand wheel to bring the upper
looper to its lowest position. Press the lever
(18) down and push it to the left. Turn
the hand wheel to ensure that the upper
looper is indeed disengaged.
Remove the knife guard and push the
sewing table (accessory) down between
the two front cover guides.
6-4