Safety Precautions - Kodak EKTAPRO Quick Reference Manual

Extra Bright Lamp Module
According to a temperature increase in the slide gate which, therefore, needs more careful
handling when using slides, mounts and lamps.
With the higher light output of the Extra Bright Lamp Module the temperature in the slide gate rises.
To enable a smooth operation following should be considered:
Use only light respectively light gray slide mounts (e.g.
Wess slide mounts). Slide mounts with only one dark or
black side have to be sorted in with the light side facing the
lamp. Please pay special attention when sorting your slide
mounts in rear projections:
Do not use a lamp type EXW/15 h for the projector (higher temperature - lamp not
available from Kodak).
Consider the room temperature! It may not exceed 35 degrees C!
High-Light-Mode (models 7010, 7020, 9010, 9020): Slide projection time per
slide may not exceed 1 minute!
If these hints are not considered, mounts may
n
Slide Gate Temperature
Lamp Module
Extra Bright
Extra Bright in High Light Setting
Extra Bright in Economy Setting
Standard
Standard +10
Quick Reference -- The ultimate reference for Kodak

Safety Precautions

EXR lamp
80
90
65
65
75
EKTAPRO
deform!
Temperature °C
FHS lamp EXY lamp
58 49
64 56
50 42
Slide Projectors
40