Page 1
KODAK EKTAGRAPHIC III Slide Projector, Model AFT The KODAK EKTAGRAPHIC III Slide Projector, Model AFT, is a modified version of the standard Model A projector. A timer-with-fade feature was added specifically for use in cinema pre-show applications. It was available to a limited number of companies involved with theater pre-show advertising systems.
FADE and VIEW controls There are three controls for the special features of the AFT Projector. They are located under the projector handle. 1. Automatic AFT mode (ON / OFF) When this switch is ON ( I ), slides will advance automatically using the VIEW and FADE times selected.
We urge you to provide a permanent, properly installed 3-wire receptacle as the source of power for this projector. Your projector is designed to operate with 110 to 125 volts, 60 Hz current only. Incorrect voltage could cause the projector to malfunction. Inputs in excess of 125 volts will adversely affect lamp life.
First slide in tray not properly focused Slide in different type of mount from others Projection lens installed improperly Slide itself is not sharp Curved-field lens used with glass, plastic, or non-embossed mounts Curved field lens used for rear projection...
Kodak will repair it without charge, except for worn-out projector lamps. If Kodak is unable to repair the projector, the option of replacement or refund of the purchase price will be available.
Need help?
Do you have a question about the Model AFT and is the answer not in the manual?
Questions and answers