No-Slide-No-Light - Kodak EKTAPRO Quick Reference Manual

n
Switchable "no slide no light" feature
No slide no light means: If no slide is in the tray compartment (and therefore, in the slide
gate of the projector) the shutter will not open. No disturbing white light will interrupt your
presentation.
IR Remote System RA
CAT No 712 1072
CAT No 712 1064
Quick Reference -- The ultimate reference for Kodak
No slide no light
Ektapro
4020, 5020, 7020
and 9020
IR Receiver
Note
There are two reasons to switch off this feature:
1. High IR-transmissive slide mounts
There are some mounts on the market which do not
reflect IR radiation. That means they cannot be de-
tected by the IR sensor in the slide gate. The result is
that the shutter will not open.
and RA/LP 2. Light on the screen
Tray replacement is easier done if the room is not
totally dark. You will appreciate to have light on the
screen.
To switch off (and on again)
the "no slide no light feature"
input <550> and confirm with
<*>
EKTAPRO Slide Projectors
27