Autofocus - Kodak EKTAPRO Quick Reference Manual

n
Important Note for use of Autofocus
n Important
Use either glass or glassless (cardboard) mounted slides! Never
mix them!
n AF and Superslides
Use of Autofocus with 4 x 4 slides and 4 x 4 condensor is not
recommended. As the sides of the condensor are too smooth (not
grounded, IR radiation from the lamp can enter the condensor and
may interfere the IR detectors of the AF.
n AF and slide mount material
Some slide mounts consist of plastic material that allows the IR
radiation to pass through. As not reflected it will not be detected
by the IR sensor. The AF will not work properly. In this case you
need to replace these mounts.
Quick Reference -- The ultimate reference for Kodak

Autofocus

Ektapro
5020, 9020
EKTAPRO Slide Projectors
26