Kodak EKTAPRO Quick Reference Manual page 17

n
One IR Remote and two Ektapro 7020 or 9020 Projectors
EKTAPRO
7020, 9020
MASTER
CAT NO 715 3992
max.
30 m!
IR Remote System RA
CAT No 712 1072
and RA/LP
CAT No 712 1064
Need a third projector in parallel?
With a special cable available from AVSZ (
projector
Quick Reference -- The ultimate reference for Kodak
Parallel Projection
Parallel Mode Setting
Dissolve Cable
EKTAPRO
4010, 4020, 5000, 5020,
7000, 7010, 9000, 9010,
9020
SLAVE
To activate the Parallel Mode
input <970> and confirm
with <*>
Note
The Parallel Mode (970) must be set again
after projector has been switched off/on
again! If you want to keep the setting,
switch projector to standby! Do not switch
it off!
address page 69) you can connect a third
EKTAPRO Slide Projectors
17