Kodak EKTAPRO Quick Reference Manual page 32

n
Installation
Brass
1.
Insert
Hex Screw
2.
Insert
Hex Screw
3.
Hex Screw
Quick Reference -- The ultimate reference for Kodak
Lenses
Lens Support
Slot up!
1.
Screw hex screw into the insert.
2.
Use the hex spanner to screw hex
screw with the insert into the
projector's hole.
3.
Remove hex screw and fix
baseplate as shown in the picture.
The insert remains in the hole.
Slot up!
Hex Spanner
Insert
Position for lenses with a
small diameter.
Position for lenses with a
large diameter. Turn
baseplate.
Hex Spanner
EKTAPRO Slide Projectors
32