Fading - Kodak EKTAPRO Quick Reference Manual

n
Fading up and down (Soft Slide Change) with one projector via IR
Remote System

Fading

avoids hard
light changes
during slide
Fade Down: Set time via IR. Within this time lamp decreases brightness!
transport!
Fade Up: Set time via IR. Within this time lamp increases brightness!
EKTAPRO
7020, 9020
IR Remote Receiver
CAT No 712 8606
max.
30 m!
IR Remote System RA
CAT No 712 1072
and RA/LP
CAT No 712 1064
Quick Reference -- The ultimate reference for Kodak
Soft Slide Change
(One Projector)
Note
The Fading Mode must be set again after
projector has been switched off/on! If you
want to keep the setting, switch projector to
standby! Do not switch it off!
EKTAPRO
Input fade times of 0 sec (hard cut) up for
a long fade of 9.9 sec in increments of a
tenth of a second
Code: <801 - 899>
Example: 4 s
Input <840> and confirm with <*>
Slide Projectors
22