n
Racks
n
Fixing the projector
For fixing the projector you can use the three holes on the bottom (
Into the holes you have to screw so called inserts (expansion collars) that can hold the screws. The
illustrations show how to put the inserts into the projector's holes.
Inserts (expansion collars)
outer thread M7
inner thread M5
(max. length allowed 49 mm)
Quick Reference -- The ultimate reference for Kodak
Professional Installation
Racks - Fixing the projector
Some companies offer racks for professional
use. (
Note the position of the slot!
1.
Screws M5
2.
3.
Addresses pages 69 and 72)
see illustration next
diameter
6.4 mm
depth 10 mm
EKTAPRO
Slide Projectors
page!)
51