Kodak EKTAPRO Quick Reference Manual page 48

n
Controlling an Ektapro via 1000 Hz Cassette Recorder
Years ago there have been cassette recorders on the market with a slide synchronizer installed. The
synchronizer allowed to send and record a 1000 Hz signal to the projector which actuated the slide
transport. The 1000 Hz recorders can be used with an Ektapro but a so called slide synchronizer
adapter between recorder and projector is needed. As only a simple closing contact is required it is
possible to solder such an adapter by your own. For further details see page 67.
n
Last slide position memory
If the Ektapro is switched on and off the system executes a check up and turns the transport ring
and slide tray into the zero position. Hence, when switching the projector on again, it will not
proceed with the slide position at the time you switched it off.
If you need such a special feature we can offer you a modified Ektapro model. It is the Ektapro
9020 Cine - a model special modified for the needs of a cinema. When switched off, the projector
remembers the tray position. When switched on, the tray is automatically transported to this
position
Since these models have other modifications as well, we advise you to get further details from
Kodak before purchasing it.
Quick Reference -- The ultimate reference for Kodak
External Control
Important Hints
EKTAPRO Slide Projectors
48