Trays - Kodak EKTAPRO Quick Reference Manual

n
General
BEFORE:
n Check each slide's orientation (horizontal or vertical), and arrange them in the order
you wish to show them. Then turn the slide upside down.
n Number each mount in the upper right-hand corner of the film's shiny side.
n Insert your first slide into the first slot in the tray so that the number is visible on the
outer circumference of the tray. Insert your second slide in the second slot with the
emulsion (dull side) facing your first slide, and so on.
AFTER:
n View each slide against a light source and orient for projection (check for proper
horizontal, vertical, right and left positioning.)
n Arrange the slides in the order you wish to show them.
n Rotate them 180 degrees - upside down.
n Number (or mark) each mount in the upper right-hand corner.
n Insert the slides into the tray slots so that the number (or mark) is on the outer
circumference of the tray.
Quick Reference -- The ultimate reference for Kodak

Trays

Inserting Slides
EKTAPRO Slide Projectors
23