Disable / Re-Enable Alarm Devices - Panasonic MEW01349 Operating Instructions Manual

Panasonic Electric Works Nordic AB
MEW01349 Rev: -
9
Operating Instructions Fire alarm system EBL512 G3, V1.1.x

Disable / Re-enable alarm devices

Outputs programmed for sounders
via menu H2/B8 be collective disabled for all control units. This is
indicated by LED Fault / Disablements "General disablements"
(L10) and "Alarm devices" (L11), which are steady ON.
In case of a fire, the sounders will remain disabled, i.e. the alarm
devices will not sound until they are re-enabled again via menu
H2/B8.
NOTE!
Outputs of type "Alarm devices" cannot be individually disabled.
See also chapters "Disable output (H2/B3)", page 94 and "Disable / re-
enable alarm devices (H2/B8)", page 100.
31
10
(i.e. type "Alarm devices") can