Disable / Re-Enable All Control, Extinguishing, Ventilation And Interlocking Outputs - Panasonic MEW01349 Operating Instructions Manual

Panasonic Electric Works Nordic AB
MEW01349 Rev: -
11
Operating Instructions Fire alarm system EBL512 G3, V1.1.x
Disable / Re-enable all control,
extinguishing, ventilation and
interlocking outputs
All control outputs programmed as type:
 Control (general)
 Extinguishing
 Fire ventilation
 Control / Extinguishing / Fire ventilation
 Interlocking
... can via menu H2/B7 be collective disabled for one, several or all
control units. This is indicated by LED Fault / Disablements
"General disablements" (L10).
They will remain disabled until they are re-enabled again via menu
H2/B7.
See also chapter "Disable / re-enable output type (H2/B7)", page 98.
33