Normal Sounds; Options - Kenmore HE 3t 110.4596 Series Owner's Manual And Installation Instructions

Front-loading automatic washer
Hide thumbs Also See for HE 3t 110.4596 Series:
Table of Contents

Advertisement

Available languages

Available languages

Handwash/Delicate
Use this cycle to clean handwashable
and special-care
garments. This cycle combines low-speed
tumbling and extra
low speed spin for gentle fabric care.
Use mesh garment bags to wash undergarments
such as
underwire bras, items with strings, and small items such as
socks.
Extra Cycles
Select the button for the desired cycle.
CUSTOM
PROGRAM
@
PRSS & HOLD 3 SEC.
RINSE& SPIN
@
DRAIN& SPIN
You can change the selection anytime before START is selected.
Custom
Program
Custom Program allows you to store a customized
wash cycle for
future use.
To Customize
a Wash Cycle:
f.
Select a cycle.
2. Select the desired OPTIONS.
3. Select the desired MODIFIERS.
4. To record the cycle press and hold Custom Program
(approximately
3 seconds) until a beep sounds. The Custom
Program cycle is now stored for future use.
5. Press START.
To reuse this cycle at another time, select CUSTOM PROGRAM
and press START.
Rinse & Spin
Use this cycle to get a rinse and spin only. This cycle combines
fast-speed tumbling and high-speed
spin. If desired, you can
reduce the spin speed by selecting the speed you want from the
SPIN SPEED modifier.
Rinse & Spin is useful for
Loads that need rinsing only.
Adding fabric softener to a load using the fabric softener
dispenser.
Drain & Spin
Use this cycle to drain your washer or to drain and spin your
wash load. The spin speed is preset to high. If desired, you can
reduce the spin speed by selecting the speed you want from the
SPIN SPEED modifier.
NOTE: Loads of synthetics, delicate fabrics, handwashables,
and
woolens should be drained with no spin or low spin to avoid
fabric stress.
As with any new product, you will hear sounds that you are not
accustomed
to. You may hear various sounds when the door is
locked and unlocked and during the washing, rinsing, and
spinning process. Between changes in wash actions, there will
be momentary pauses. You will hear water spraying and
splashing during the wash and rinse cycles. These new sounds
and pauses are part of normal washer operation. See
"Troubleshooting."
You can customize your wash by adding options to your cycle
selections. You can add or change an option after starting a cycle
anytime before the selected option begins. Not all Options are
available with all cycles.
OPT(ONS
PREWASH
EXTENDEDSPIN
END of CYCLE
SIGNAL
ON/ OFF
See the "Laundry Guide" section for an overview of possible
options for each Wash Cycle selection.
You can select more than one option for a cycle. Some
options cannot be added to some cycles.
If an option is available with a selected cycle, the light for that
option will glow when selected.
If an option is unavailable with a selected cycle, there will be a
short tone, and the light for that option will not glow when
selected.
Prewash
Use this option for loads of heavily soiled garments that need
pretreatment.
Add detergent to the Main Wash Compartment
of the
dispenser drawer.
Use powdered detergent to avoid laundry additives from pre-
dispensing into the wash system.
This option adds tumbling time prior to the selected main cycle.
The washer continues automatically
from prewash into the main
wash cycle.
Extended
Spin
Use this option to add an additional spin to any cycle to improve
drying times for some heavy fabrics or special-care
items by
reducing excess water, which may save energy.
End of Cycle Signal
This signal is helpful when you are removing items from the
washer as soon as it stops. Select ON or OFR
16

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

He 3t 110.4597 series

Table of Contents