GE JGBP36 Owner's Manual & Installation Instructions page 12

Using the oven controls.
Throughout this manual, features and appearance may vary from your model.
, t
L
%0 °0jc- ,a
0
(0re, 0
T:. cont:s
LTim k2 .... L)
On/Off
12
OvenControl,Clockand TimerFeaturesand Settings
(onsomemodels)
o ake/Temp Recall Pad O
Touch this pad to select the bake function.
Bake Light
Flasheswhile in edit mode-you can change the
oven temperature at this point. Glowswhen the
oven is in bake mode.
O Start/On Pad
Must be touched to start any cooking or cleaning
function.
O isplag
Shows the time of day, oven temperature,
whether the oven is in the bake, broil or selh
cleaning mode and the times set for the timer
or automatic oven operations. The display will
show PREwhile preheating. When the oven
reaches the selected temperature, the oven
control will beep and the display will show the
oven temperature.
If "F- and a number or letter" flash in the displag and
the oven contro! signals, this indicates a function error
code.
0
0
If sour oven was set for a timed oven operation and a
power outage occurred, the clock and a!! programmed _-_
functions must be reset.
Thetime of dog wi!! flash in the displag when there has
been a power outage. Resetthe clock.
On models with an oven door latch, if the function error
codeappears during the self-cleaningcgcle,checkthe
ovendoor latch. Thelatch handle mag have beenmoved,
evenif onlg s!ightlg,from the latchedposition.Makesure
the latch is moved to the right as far asit will go.
Touch the Cleur/Off pud. Allow the oven to coo!
for one hour. Put the oven back into operation. If the
function error code repeats, disconnect the power
to the range and ca!!for service.
Kitchen Timer On/Off Pad
Touch this pad to select the timer feature. Then
press the + and - pads to adjust the timer.
Kitchen Timer Light
Flasheswhile in edit mode-sou can change the
set time at this point. Glowswhen the timer has
been activated. Flashesagain when the time has
run out until the control is reset.
Clock Pad
To set the clock, press this pad twice and then
press the + and - pads. The time of dag will
flash in the displag when the oven is first
turned on.
Start Time Pad
Use along with the Cooking Time or Self Cleon
pads to set the oven to start and stop
automaticallg at a time you set.
Start Time Light
Flasheswhile in edit mode-sou can change the
start time at this point. Glowswhen the function
has been activated.
Cooking Time Pad
Touch this pad and then touch the + or - pads
to set the amount of time Sou want sour food
to cook. The oven will shut off when the cooking
time has run out.
Cooking Time Light
Flasheswhile in edit mode-sou can change the
set time at this point. Glowswhen the function
has been activated. Flashesagain when the time
has run out until the control is reset.