Adjustable Dividers; Tail Package Retainer; Freezer Features; Automatic Ice Maker - Kenmore 59670003001 Use & Care Manual

Adjustable Dividers
Adjustable dividers keep items in place and adjust to
meet individual storage needs. Divider fits in any Fresh
Food door bucket or door shelf.
Tall Package Retainer
J.J Tatl package retainer keeps tail items secure. Retainer
_1_ fits in any Fresh Food door bucket or door shelf.
U,I
J
Freezer Features
Frost-Free System
The fresh food and freezer sections are compIetely frost-
free. Defrosting is automatic under normal conditions.
Fresh food and freezer sections never have to be
defrosted.
Automatic Ice Maker
• Make sure ice bucket is in place and ice maker arm(B)
is in the on position(C).
• After freezer section reaches normal temperature, the
ice maker fills with water and begins operating. Allow
24-48 hours after installation before first harvest of ice.
Ice maker produces 7 to 9 harvests of ice in a 24-hour
period under ideal conditions.
• After ice is formed, ice maker drops ice cubes into ice
storage bucket. During ice production, ice maker arm
raises and lowers. When ice storage bucket is full, ice
maker arm(B) turns ice maker off(A).
Note: Discard first 3 harvests of ice so any impurities left
in the water line after installation are not consumed.
• If you wish to stop automatic ice production lift ice
maker arm. A definite click is heard when proper
position is reached. Ice maker arm will remain in that
position until pushed down.
%" mm_ A
\.
\_c
I A CAUTION I
Make sure shelf is secure before placing items on
shelf to avoid property damage.
Slideout Shelf
Slide out shelf pulls forward for easy access to items in
back.
• Remove slideout shelf by sliding forward until bali(B)
beneath center rail(A) catches in molding groove.
• Grasp shelf by center rail(A), pull up, and remove.
• Slide in until ball(B) falls into molding groove.
A
B
Vertical Shelf Divider
Install vertical sheIf divider by completing the following
steps:
1. Slide prongs of shelf divider beneath desired grill
work, slightly off-center from center rail.
2. Press top of divider down and slide hook assembly
beneath center rail.