Tiff-Out Bin; Care And Cleaning; General; Odor Removal - Kenmore 59670003001 Use & Care Manual

Tilt-Out Bin
The tilt-out bin provides convenient storage for frozen
food items in freezer door and tilts forward for easy
access of those items.
Care and Cleaning
WARNING
I
To avoid electrical shock which can cause severe
personal injury or death, disconnect power to
refrigerator before cleaning. After cleaning, connect
power.
CAUTION
I1
To avoid personal injury or property damage, read and
follow atl cleaning product manufacturer's directions.
General
1. Use a clean sponge or soft cloth and a mitd detergent
in warm water. Do not use abrasive or harsh
cleaners.
2. Rinse surfaces with warm water. Dry surfaces with a
soft, clean cloth.
3. Do not use paper towels, window sprays, scouring
cleansers or flammable fluids to clean plastic parts
(covers and panels). These can scratch or damage
material.
• Do not place buckets, shelves, etc. in dishwasher.
4. Wax painted metal surfaces at least twice a year
using an appliance or automotive (clear coat safe)
paste or liquid wax. Apply wax with a clean, soft
cloth. Do not wax plastic parts.
Odor Removal
1. Remove att food.
2. Clean att interior surfaces including ceiling, floor, and
walls according to General instructions. Pay special
attention to corners, crevices, and grooves. Include
all drawers, shelves, and gaskets.
3. Wash and dry all bottles, containers and jars before
returning food to refrigerator. Wrap foods in tightly
sealed containers to prevent further odor. After 24
hours, check if odor was eliminated.
Complete the following steps if odor was not eliminated.
4. Complete steps 1-2.
5. Place garden fresh crispers on top shelf of Fresh
Food section. Pack Fresh Food and freezersections,
including doors, with crumpled sheets of black and
white newspaper.
6. Place charcoal briquettes randomly throughout
newspaper.
7. Close doors and let stand 24-48 hours.
8. Remove charcoal briquettes and newspapers.
9. Complete steps 2-3.
If odor is still not eliminated, contact a Sears Service
Center.
Adhesives
1. Remove glue residue by rubbing toothpaste into
adhesive with fingers until adhesive loosens.
2. Rinse surface with warm water. Dry surface with a
soft, clean cloth.
Door Gaskets
1. Clean door gaskets as necessary according to
General instructions. Gaskets must be kept clean
and pliable to asure proper seal.
2. Apply a light film of petroleum jelly on hinge side d
gasket to keep gaskets pliable.
Condenser Coils
Clean condenser coil every 3 months to ensure maximum
performance of refrigerator. Accumulated dust and tint
may cause the following:
• reduced cooling performance
• increased energy usage
• premature part failure
1. Disconnect power to unit.
2. Remove toe grille by holding ends and pulling
forward.
3. Clean front surface of condenser colt with a vacuum
cleaner hose nozzle.
4. Replace toe grille by inserting clips in holes and
snapping in.
Glass Shelves
CAUTION
I
To avoid personal injury or property damage, handle
tempered glass shelves carefully. Shelves may break
suddenly if nicked, scratched, or exposed to sudden
temperature change.
Remove shelf by lifting front, releasing hooks from metal
track then pulling out. Place shelf on a towel. Allow shelf
to adjust to room temperature before cleaning.
Clean crevices by completing the following steps:
1. Dilute mild detergent and brush solution into crevices
using a plastic bristle brush. Let set for 5 minutes.
9
ITI
6"t
r"
m