Fm/Am Tuning A/V; Using Preset Tuning; Tuned; Stereo - JVC RX-5030VBK Instructions Manual

F_ Remotecontrol
FM/AM FM/AM FM MODE
TUNING PRESET
A/V A/V
MEMORY
10 keys ----
FM/AM --
FM MODE --
V
(Z 3 "_c_" Oii
iiil
_®_
ooo
@ooo
oooo
i iTI_TI_j hil [_ I-._ hV_ F tl"_!lffl I _vj
I Select the band (FM or AM).
RX-6030VBI(/RX-6032VSL
Press FM or AM on the front panel.
The last received station of the selected band is tuned in.
• When using the remote control, press FM/AM.
The last received station of the last selected band is tuned in.
Each time you press the button, the band alternates between
FM and AM.
RX-5030VBI(/RX-5032VSL
Press FM/AM.
The last received station of the last selected band is tuned
in.
• Each time you press the button, the band alternates
between FM and AM.
• --= _,[] "-= '=_ "=_...
B7.5
MHZ20
Ex.: When the FM band is selected.
2 Press FM/AM TUNING A/v on the front panel
repeatedly until you find the frequency you
want.
Once a station is assigned to a channel number, the station
can be quickly tuned in.You can preset up to 30 FM and
15 AM stations.
To Store the Preset Stations I_l
Before you start, remember...
There is a time limit in doing the following steps. If the setting
is canceled before you finish, start again from step 2.
I Tune in to the station you want to preset
(see "Tuning in to Stations Manually").
If you want to store the FM reception mode for this station,
select the FM reception mode you want. See "Selecting
the FM Reception Mode" on page 23.
2 Press MEMORY.
The CH- indicator lights up and the channel number
position will flash on the display for about 5 seconds.
875
"" "20
Ex.: When the FM band is selected in step f.
Notes:
• When you hold FM/AM TUNING A/T in step 2, the frequency
keeps changing until a station is tuned in,
• When a station of sufficient signal strength is tuned in, the TUNED
indicator lights up on the display
• When an FM stereo program is received, the STEREO indicator also
lights up.
22