JVC RX-5030VBK Instructions Manual page 77

After pressing CD, you can use the following buttons for the
CD operations:
Start playback.
1_14l Return to the beginning of the current
(or previous) tracks.
Skip to the beginning of the next tracks.
• Stop playback.
II Pause playback. To release, press _.
1 - 10, +10 Select a track number directly.
• For track number 5, press 5.
• For track number 15, press +10, then 5.
• For track number 20, press +10, then 10.
CD changer
After pressing CD-DISC, you can use the following buttons for
the CD changer operations:
Start playback.
1_14l Return to the beginning of the current
(or previous) tracks.
Skip to the beginning of the next tracks.
• Stop playback.
II Pause playback. To release, press _.
1 - 6, 7/P Select the number of a disc installed in a CD
changer.
After pressing CD, you can use the following buttons for the
CD changer operations:
1 - 10, +10
Select a track number directly.
• For track number 5, press 5.
• For track number 15, press +10, then 5.
• For track number 20, press +10, then 10.
• For track number 30, press +10, +10, then 10.
Example:
Selecting disc number 4, track number 12, and starting
playback.
I Press CD-DISC, then press 4.
2 Press CD, then press +10, 2.
If your CD changer is of 200-disc loading capability
(except for XL-MC100 and XL-MC301),
you can do the following operations using the number buttons
after pressing CD:
! Select adisc number.
2 Select a track number (always enter two digits).
3 Start playback.
Examples:
• Selecting disc number 3, track number 2, and starting
playback.
Press 3, then, O, 2, then _.
• Selecting disc number 10, track number 5, and starting
playback.
Press 1, O, then, 0, 5, then _.
• Selecting disc number 105, track number 12, and starting
playback.
Press 1, O, 5, then 1,2, then _.
CD recerder
After pressing TAPE/CDR, you can use the following buttons
for the CD recorder operations:
Start playback.
_l Return to the beginning of the current
(or previous) tracks.
Skip to the beginning of the next tracks.
• Stop playback.
II Pause playback. To release, press ),-.
REC PAUSE Press this button to enter recording pause.
Press this button then ),- to start recording.
Note:
Before starting the above operations, make sure that you have
changed the source name correctly. See page 12.
33