JVC RX-5030VBK Instructions Manual page 79

IMPORTANT:
To operate JVC's video components using this remote control:
• You need to connect JVC's video components through the AV
COMPU LINK terminals (see page 30) in addition to the connections
using cables with RCA pin plugs (see pages 8 and 9).
• Some JVC VCRs can accept two types of control signals--remote
code "A" and "B:' Before using this remote control, make sure that
the remote control code of the VCR connected to the VCR jacks is
set to code "A."
• When using the remote control, aim the remote control directiy at
the remote sensor on each component, not on the receiver.
uCfl
You can always use the following buttons:
STANDBY/ON O/I VCR Turn on or off the VCR.
VCR OH +/- Change the TV channels on the
VCR.
After pressing VCR, you can use the following buttons for the
VCR operations:
Start playback.
FF Fast wind a tape.
REW Rewind a tape.
• Stop playback or recording.
II Pause playback. To release, press =,,-.
1 - 9, 0 Select a TV channel on the VCR.
REC PAUSE Press this button to enter recording pause.
Press this button then _ to start recording.
You can always use the following buttons:
STANDBY/ON (b/I DVD Turn on or off the DVD player.
After pressing DVD (or DVD MULTI*) of the source selection
buttons, you can use the following buttons for the DVD
operations:
Start playback.
_l Return to the beginning of the current
(or previous) chapters.
Skip to the beginning of the next chapters.
• Stop playback.
II Pause playback. To release, press =,,-.
* RX-603OVBKand RX-6032VSL only.
DVD menu operations
After pressing DVD (or DVD MULTI*), you can use the
following buttons for DVD menu operations:
* RX-603OVBKand RX-6032VSL only.
TV
You can always use the following buttons:
STANDBY/ON _/I TV/CATV
Turn on or off the TV.
TV/VIDEO Change the input mode (TV tuner and
video input).
TV VOLUME +/- Adjust the volume.
TV/CATV OR +/- Change the channels.
After pressing TV SOUND, you can use the following buttons
for the TV and CATV operations:
1 - 9, 0, +10 (100+) Select a channel.
RETURN (10) Function as the RETURN button.
,ill /iii (
MENU _Ri _,i_RF_
_NT_R @
MENU Display or hide the menu screen.
A/V/I,,_/_I Select an item on the menu screen.
ENTER (10) Enter a selected item.
35