JVC RX-5030VBK Instructions Manual page 72

This section is ONLY for RX-6030VBK and RX-6032VSL
This receiver provides the DVD MULTI playback mode for
reproducing the analog discrete output mode of the DVD
player. Before playing a DVD, refer also to the manual supplied
with the DVD player.
Onthe front panel
From the remote control
Q Q'Q_}
_®_
0000
DVD MULTI
Press DVD MULTI.
_1,'_ rlULT _ -q2
oo°, ,ooo
%
DVD MULTI
Note:
When you select "DVD MULTI"as the source to play, Surround/
DSP mode is canceled, and SURROUND and DSP buttons do
not work,
2 Select the analog discrete output mode on
the DVD player, and start playing a DVD.
• Refer also to the manual supplied withthe DVD player.
Press DVD MULTI.
- -.
I1L'II I'IULTI 32
Note:
When you select "DVD MULTI" as the source to play, Surround/
DSP mode is canceled, and SURROUND and DSP buttons do
not work.
2 Select the analog discrete output mode on
the DVD player, and start playing a DVD.
• Refer also to the manual supplied with the DVD player.
If you want to adjust the sound, see pages 19 to 21.
Once you have made adjustments, the receiver retains the
adjustments until you change them.
If you want to adjust the sound, see pages 19 to 21.
Once you have made adjustments, the receiver retains the
adjustments until you change them.
28