JVC RX-5030VBK Instructions Manual page 83

Audio/video control receiver
Hide thumbs Also See for RX-5030VBK:
Table of Contents

Advertisement

RX-6030VBK/RX-6032VSL
Amplifier
Output Power:
Audio
Audio Input Sensitivity/Impedance
(1 kHz):
Audio Input (DIGITAL IN)X:
Video
Audio Output Level:
Signal-to-Noise
Ratio ('66 IHF/'78 IHF):
Frequency Response (8 _2):
Bass boost:
Tone Control:
Video Input Sensitivity/Impedance:
Composite video:
S-video:
Component video:
Video Output Level/Impedance:
Composite video:
S-video:
Component video:
Synchronization:
Signal-to-Noise
Ratio:
At Stereo operation:
Front channels:
100 W per channel,
rain. RMS,
driven
into 8 _, 40 Hz to
20 kHz with
no more than
0.8% total
harmonic
distortion.
At Surround operation:
Front channels:
100 W per channel, min. RMS, driven into 8 _ at 1 kHz with no
more than 0.8% total harmonic distortion.
Center channel:
100 W, rain. RMS, driven into 8 _2 at 1 kHz, with no more than
0.8% total harmonic distortion.
Surround channels:
100 W per channel, min. RMS, driven into 8 _ at 1 kHz, with no
more than 0.8% total harmonic distortion.
CD, TAPE/CDR, VCR, TV SOUND, DVD:
220 mY/47 k£_
Coaxial:
DIGITAL 1 (DVD):
0.5 V (p-p)/75 _2
Optical:
DIGITAL 2 (CD):
-21 dBm to -15 dBm (660 nm -+30 nm)
Corresponding
to Linear PCM, Dolby Digital, and DTS Digital Surround
(with sampling frequency--32
kHz, 44.1 kHz, 48 kHz).
TAPE/CDR, VCR:
220 mV
CD, TAPE/CDR, VCR, TV SOUND, DVD:
87 dB/78 dB
CD, TAPE/CDR, VCR, TV SOUND, DVD:
20 Hz to 20 kHz (_+1dB)
+3 dB -+1dB at 100 Hz
Bass (100 Hz):
_+10dB
Treble (10 kHz):
_+10dB
DVD, VCR:
1 V(p-p)/75 £_
DVD, VCR:
(Y: luminance):
1 V(p-p)/75
(C: chrominance,
burst):
0.286 V(p-p)/75 _2
DVD, VCR:
(Y: luminance):
1 V(p-p)/75
(PB, PR):
0.7 V(p-p)/75 £_
VCR, MONITOR OUT:
VCR, MONITOR OUT: (Y: luminance):
(C: chrominance,
burst):
MONITOR OUT:
(Y: luminance):
(PB, PR):
Negative
45 dB
1 V(p-p)/75 £_
1 V(p-p)/75
0.286 V(p-p)/75 _2
1 V(p-p)/75 £_
1 V(p-p)/75
FM tuner (IHF)
Tuning Range:
Usable Sensitivity:
50 dB Quieting Sensitivity:
Signal-to-Noise
Ratio (IHF-A weighted):
Total Harmonic Distortion:
Stereo Separation at REC OUT:
Alternate Channel Selectivity:
Frequency Response:
87.5 MHz to 108.0 MHz
Monaural:
Monaural:
Stereo:
Monaural:
Stereo:
Monaural:
Stereo:
35 dB at 1 kHz
45 dB: (-+400 kHz)
30 Hz to 15 kHz: (+0.5 dB, -3 dB)
12.8 dBf (1.2 pV/75 _2)
21.3 dBf (3.2 pV/75 _2)
41.3 dBf (31.5 pV/75 _2)
78 dB at 85 dBf
73 dB at 85 dBf
0.4% at 1 kHz
0.6% at 1 kHz
AM tuner
Tuning Range:
530 kHz to 1 710 kHz
Usable Sensitivity:
Loop antenna: 400 pV/m
Signal-to-Noise
Ratio:
50 dB (100 mV/m)
General
Power Requirements:
Power Consumption:
Dimensions
(W x H x D):
Mass:
AC 120 VF_, 60 Hz
180 W/230 VA (at operation)
2 W (in standby mode)
435 mm x 146.5 mm x 409.5 mm
(17 3h6in. x 5 W_6in. x 16 V8 in.)
8.8 kg (19.5 Ibs)
39

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx-6032vslRx-6030vbkRx-5032vsl

Table of Contents