LIFESTYLER Expance 550 User Manual page 6

,
.
With the help of a second person, carefully lower the Left
and Right Uprights (1,43) until the handrails are resting
on the floor.
Attach six Base Pads (51) to the bottom of the Base (55)
in the indicated locations. Note: One extra Base Pad is
included.
See drawing 4 above. With the help of a second person,
raise the Left and Right Uprights (1, 43) until the Base
(55) is resting flat on the floor.
Before moving the treadmill, see HOW TO MOVE THE
TREADMILL on page 10.
Han 5
=
Place the Wire Harness (19) around the inner side of the
Base (55) as shown. Make sure that the Wire Harness is
out of the way. DO NOT feed the slack Wire Harness
into the Belly Pan (48). The Wire Harness may be dam-
aged if it is inside the Belly Pan.
55
48
7. Remove the backing from the Adhesive Clip (16). Press
the Adhesive Clip onto the Rear Roller Cover (86) in the
indicated location. Press the Allen Wrench (62) into the
Adhesive Clip.
Make sure that all parts are tightened before you use the
treadmill. Note: To protect the floor or carpet, place a
mat under the treadmill.
86 62
6