LIFESTYLER 831.297052 Owner's Manual page 11

Extended stride profile
Table of Contents

Advertisement

1. SYMPTOM: THE POWERDOESNOTTURNON
a. Make sure the power cord is plugged into a properly grounded outlet. (See OPERATION AND
ADJUSTMENT in this manual.) If an extension cord is necessary, use only a 14-gauge general-
purpose cord of approximately five feet in length.
b. After the power cord has been plugged
in, make sure the safety key is fully inserted into the base
console.
Various indicators on the base console should light.
(See OPERATION
AND ADJUST-
MENT in this manual.)
C.
Check the circuit breaker located on the front of the
frame near the power cord.
The circuit breaker is
designed to protect the electrical system.
If the circuit
breaker has tripped, the switch will protrude as shown.
To reset the circuit breaker, allow the treadmill to cool
for five minutes, and push the switch back in.
Tripped
Reset
2. SYMPTOM:
THE POWER
TURNS
OFF DURING
USE
a. Check the circuit breaker
located
on the treadmill
frame near the power cord.
If the circuit break-
er has tripped, the switch will protrude.
(See the drawing above.)
To reset the circuit breaker,
wait for five minutes and then press the switch back in.
b. Make sure the power
cord is plugged
in.
c. Remove
the safety key from the base console.
Reinsert
the safety key fully into the base
console.
Various
indicators
on the base console
should
light.
3. SYMPTOM:
THE CONSOLE
DOES NOT FUNCTION
PROPERLY
a.
If a console
malfunction
occurs, an error code ("PO" or "EEEE")
may appear on the display.
If an
error code appears,
remove
the safety key, wait for ten seconds
and then reinsert
the safety key.
If the error code appears
again, call our Customer
Service
Department.
Do not operate
the
treadmill
until the problem
is corrected.
4. SYMPTOM:
THE PULSE
EARCLIP
DOES NOT FUNCTION
PROPERLY
a. Make sure the pulse earclip
is plugged
fully into the jack on the console.
Rub your left ear lobe
and reposition
the earclip.
Attach the clothes
clip to your collar.
b. Try standing
still while measuring
your pulse.
c. The pulse earclip
may need to be cleaned.
Press the earclip open, and wipe the two clear
circles
inside the earclip,
using a cotton swab saturated
with denatured
alcohol.
WARNING:
The pulse earclip is not a medical device. Various factors, including the
user's movement while exercising, may affect the accuracy of heart rate readings.
The
earclip is intended only as an exercise aid in determining heart rate trends in general.
5. SYMPTOM:
THE WALKING
BELT SLOWS
WHEN WALKED
ON
a.
Walk on the treadmill
for 10 minutes
to break in the walking
platform.
During this break-in
period,
it is normal
for the walking
belt to slow.
If an extension
cord is needed, use only a 14-gauge
general-purpose
cord of approximately
five
feet in length.
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

10.0 esp

Table of Contents