Hoover U5473-900 Owner's Manual page 5

CARTONCONTENTS
A, Handle Section
B. Cleaner Body
C. Hose, Cleaning Tools and Wands
D. Hose Rack
E. Handle Bolts and Nuts Packet
(in bag with owner's manual)
Remove all parts from cartonand
identify each item shown.
Make sure all parts are located before
disposing of packing materials.
A B
ATTACHRACKAND HANDLE
CAUTION A,,
To reduce the dsk of injury from moving parts,
unp]ug vacuum before assembling.
1.2 Open tool cover on handle section (A).
1.3 Attach hose rack to handle section by rifling
hooks (B) on rack over slots (C) on handle section.
1.4Align hole on rack with circular tab on handle.
1.5 Remove bag door on cleaner body by pushing
down at top of door and pulling door outward.
Switch (A) above bag door should be in OFF
position.
1.6 While holding rack in place, slide handie onto
cleaner body.
Make sure tab is inserted _[|y into slot.
1.7 Push bolts into holes On back of handle.
1.8 Race nuts in recessed areas on front of handle.
Hold each nut in place while tightening each bolt
securely with a Phillips screw ddver.
1.9 Reposition bag door by fitting tabs on bottom
of door into opening. Press top of door to snap
securely shut.
1.10 Press cord into the 3 notches and the clip as
shown.
III
1
\
_F
D