Cleaningtools - Hoover U5473-900 Owner's Manual

CLEANINGTOOLS
Tools allow for cleaning surfaces above the floor
and for reaching hard to clean areas.
The vacuum is ready for tool use when handle is in
upright position.
• IMPORTANT •
Bmshrofl continues to turn while product is
turned on and handle is in upright position. To
avoid damage to carpet, rugs, furniture and
flooring, avoid tipping cleaner or setting it on
furniture, fringed area rugs, or carpeted stairs
during too] use.
REMOVINGHOSE
When using cleaning tools, cleaner handle should
be in the upright position. Also, turn cleaner OFF
before disconnecting and connecting hose to hose
tube (A).
To use hose, lift hose end as shown.
SELECTPROPERTOOL
J¢
I ,
)
)
A. Dusting brush may be used for carved
furniture, table tops, books, lamps, lighting
fixtures, venetian blinds, baseboards, shutters,
and registers.
B. Furniture nozzle may be used for upholstered
furniture, draperies, mattresses, clothing,
automobile interiors, and carpeted stairs.
C. Crevice tool* may be used in tight spaces,
corners and along edges in such places as
dresser drawers, upholstered furniture, stairs
and baseboards.
D Wands are used to give extra length to your
hose. Use them with any of the above tools.
*Available on select models only.
ATTACH WAND AND TOOLS
Attach tool or wand to the hose (G).
Attach second wand or tool to wand (H) by
pushing it firmly onto the wand,
Twist wand or tool slightly to tighten or loosen
the connection.
HOW TO
CLEANTOOLS
To clean the hose, wipe
off dirt with a cloth
dampened in a mild
detergent. Rinse with a
damp cloth.
Cleaning tools may be
washed in warm water
with a detergent. Rinse
and air dry before
using.
18