Get Started - Patton electronics SMARTNODE 1200 Quick Start Manual

2. The subsequent pop-up window asks you for the login credentials (see
login credentials are:
User Name: administrator
Password: There is no password, leave this field empty
3. Click OK.
After successful login you get to the SmartNode home page, and you can configure your device. You will be pre-
sented the following home page, which contains buttons to store the current configuration state, reload the
device and restore to factory defaults. The home page also shows some system information. You can always go
back to the home page by clicking Home in the navigation bar.
SmartWare GUI Quick Start Guide
Figure 5. Login window

4.0 Get Started

figure 5). The factory default
5