Advertisement

Omega 100, Omega 200, and Omega 300 Gas Barbecues
Omega 100
Photographs are not to scale.
Specifications subj ect to change
without prior notice.
WARNING

FOR YOUR SAFETY

If you smell gas:
1.
Shut off gas to the appliance.
2.
Extinguish any open flame.
3.
Open barbecue lid or hood.
4.
If odour continues, discontinue use and
contact your local dealer.
Gas Barbecues
Assembly and Operating Instructions for
Omega 200
For outdoor use only.
Read instructions before using the appliance. Failure to follow instructions could
result in death, serious bodily injury, and/or property loss.
Warning: accessible parts may be very hot. Keep young children away.
Do not move the appliance during use.
Turn off the gas supply at the gas bottle after use.
Any modification of the appliance, misuse, or failure to follow the instructions may
be dangerous and will invalidate your warranty. This does not affect your statutory
rights.
Retain these instructions for future reference.
Leak test your barbecue annually. Check the hose connections are tight and leak
test each time you reconnect the gas bottle.
FOR YOUR SAFETY
1.
Do not store or use petrol or other flammable
vapours or liquids in the vicinity of this or any
other appliance.
2.
A gas bottle not connected for use shall not be
stored in the vicinity of this or any other
appliance.
Omega 300
0359

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OMEGA 100 and is the answer not in the manual?

Questions and answers

Summary of Contents for Outback OMEGA 100

  • Page 1: For Your Safety

    Gas Barbecues Assembly and Operating Instructions for Omega 100, Omega 200, and Omega 300 Gas Barbecues Omega 100 Omega 200 Omega 300 Photographs are not to scale. Specifications subj ect to change 0359 without prior notice. • For outdoor use only. •...
  • Page 2: Parts List

    A. Parts List Quantities vary according to model purchased. Specifications subject to change without prior notice. For more details on hardware, please see the corresponding Hardware Reference Diagram for your barbecue model. OUTBACK® OMEGA RANGE CODE PART OMEGA 100 OMEGA 200 OMEGA 300 Lava Roc k Rac k Burner...
  • Page 3 B1. Parts Diagram: Omega 100 Quantities vary according to model purchased. Specifications subject to change without prior notice. For more details on hardware, please see ‘Hardware Reference Diagram: Omega 100.’ Pre-assembled body unit includes the following individual parts: A5 A10 A11 A12 A13 A14...
  • Page 4 B2. Hardware Reference Diagram: Omega 100 Specifications subject to change without prior notice.
  • Page 5 C1. Parts Diagram: Omega 200 Quantities vary according to model purchased. Specifications subject to change without prior notice. For more details on hardware, please see ‘Hardware Reference Diagram: Omega 200.’ Pre-assembled body unit includes the following individual parts: A11 A12 A13 A14...
  • Page 6 C2. Hardware Reference Diagram: Omega 200 Specifications subject to change without prior notice.
  • Page 7 D1. Parts Diagram: Omega 300 Quantities vary according to model purchased. Specifications subject to change without prior notice. For more details on hardware, please see ‘Hardware Reference Diagram: Omega 300.’ Pre-assembled body unit includes the following individual parts: A5 A10 A11 A12 A13 A14...
  • Page 8 D2. Hardware Reference Diagram: Omega 300 Specifications subject to change without prior notice.
  • Page 9 E. Assembly TOOLS NEEDED FOR ASSEMBLY: Medium size flat blade or Philips/crosspoint screwdriver, adjustable spanner or metric spanner set. Please lay out all nuts and bolts and check lengths before assembling. Whilst every care is taken in the manufacture of this product, care must be taken during assembly in case sharp edges are present.
  • Page 10 Omega 100 Omega 200 Omega 300 *NOTE: Take care to fix the legs with Velcro attached as shown in the illustration. Omega 100 Omega 200 Omega 300...
  • Page 11 Omega 100 Omega 200 Omega 300 Omega 100 Omega 200 Omega 300...
  • Page 12 Omega 100 Omega 200 Omega 300 Omega 100 Omega 200 Omega 300 Omega 100 users skip this step and proceed directly to Step 9.
  • Page 13 Omega 100 Omega 200 Omega 300 Omega 200, Omega 300 users skip this step and proceed directly to Step 10. Omega 100 Omega 200 Omega 300 Omega 100 users skip this step and proceed directly to Step 13. Omega 200 users perform this step for both left and right side shelves.
  • Page 14 Omega 100 Omega 200 Omega 300 Omega 200 users skip this step and proceed directly to Step 13. Connect the side burner electrode wire to the tab on the side of the push button igniter. Fit the side burner venturi tube over the gas valve outlet.
  • Page 15 Omega 100 Omega 200 Omega 300 Feed grease cup holder through rear body hole. Insert grease cup into wire cup holder. Omega 100 Omega 200 Omega 300...
  • Page 16 Omega 100 Omega 200 Omega 300 Omega 100 Omega 200 Omega 300...
  • Page 17 Omega 100 Omega 200 Omega 300 ASSEMBLY IS NOW COMPLETE. PROCEED TO THE NEXT PAGE FOR INSTRUCTIONS ON OPERATION AND MAINTENANCE.
  • Page 18: Installation

    start s to fall below +10 degrees Celsius. If this F. Important Information happens we recommend propane gas is used. If in doubt, please consult your gas dealer/distributor. The Please read these instructions carefully before gas bottle should never be stood on the trolley base assembly and use.
  • Page 19: Operation

    applicable) should be open during preheating. H3. Fixing the Regulator to the Gas Bottle • Confirm all barbecue control knobs are in the off After preheating, the burner should normally be position. Connect the regulator to the gas bottle turned down to a lower setting for best cooking according to your regulator and bottle dealer’s results.
  • Page 20: Care And Maintenance

    result in a fire behind the control panel causing I8. End of Cooking Session After each cooking session, turn the barbecue burner serious damage to your barbecue. If this happens, to the “high” position and burn for 5 minutes. This the gas should be immediately turned off at the procedure will burn off cooking residue, thus making bottle.
  • Page 21: Technical Specifications

    In the unlikely event that you experience problems J5. Fixings All screws and bolts, etc. should be checked and with this barbeque, please contact: tightened on a regular basis. Customer Service Outback UK J6. Storage Store your barbecue in a cool dry place. It must be Unit 2 Farleigh Hill inspected regular...
  • Page 22: Troubleshooting

    L. Troubleshooting Problem Possible Cause Solution LP gas cylinder is empty Replace with full cylinder Burner will not light using the ignition system Faulty regulator Have regulator checked or replace Obstructions in burner Clean burner Obstructions in gas jets or gas hose Clean jets and gas hose Electrode wire is loose or disconnected on Reconnect wire...

This manual is also suitable for:

Omega 200Omega 300

Table of Contents