Advertisement

Assembly and Operating Instructions for
Outback® Omega 100, Omega 200, and Omega 300 Gas Barbecues
Omega 100
Photographs are not to scale.
Specifications subject to change
without prior notice.
WARNING

FOR YOUR SAFETY

If you smell gas:
1.
Shut off gas to the appliance.
2.
Extinguish any open flame.
3.
Open barbecue lid or hood.
4.
If odour continues, discontinue use and
contact your local dealer.
Omega 200
For outdoor use only. Not for commercial use.
Read instructions before using the appliance. Failure to follow instructions could
result in death, serious bodily injury, and/or property loss.
Warning: accessible parts may be very hot. Keep young children and pets away.
Do not move the appliance during use.
Turn off the gas supply at the gas bottle after use.
Any modification of the appliance, misuse, or failure to follow the instructions
may be dangerous and will invalidate your warranty. This does not affect your
statutory rights.
Retain these instructions for future reference.
Leak test annually, and whenever the gas bottle is removed or replaced. Check
that the hose connections are tight and leak test each time you reconnect the gas
bottle.
For Flare-up control please refer to the 'OPERATION' section of this manual.
FOR YOUR SAFETY
1.
Do not store or use petrol or other flammable
vapours or liquids in the vicinity of this or any
other appliance.
2.
A gas bottle not connected for use must not be
stored in the vicinity of this or any other
appliance.
EN (Europe)
Omega 300
0359

Advertisement

Table of Contents
loading

Summary of Contents for Outback Omega 100

  • Page 1: For Your Safety

    Assembly and Operating Instructions for Outback® Omega 100, Omega 200, and Omega 300 Gas Barbecues EN (Europe) Omega 100 Omega 200 Omega 300 Photographs are not to scale. Specifications subject to change 0359 without prior notice. For outdoor use only. Not for commercial use.
  • Page 2: Parts List

    Quantity varies according to model purchased. Specifications subject to change without prior notice. For more details on hardware, please see the corresponding ‘Hardware Reference Diagram’. OUTBACK® OUTBACK® OUTBACK® CODE PART OMEGA 100 OMEGA 200 OMEGA 300 Hood (Pre-Assembled to Body)   ...
  • Page 3 2.1. Parts Diagram: Omega 100 Quantity varies according to model purchased. Specifications subject to change without prior notice. For more details on hardware, please see the corresponding ‘Hardware Reference Diagram’. Pre-assembled body unit includes the following individual parts:...
  • Page 4 2.2. Hardware Reference Diagram: Omega 100 Specifications subject to change without prior notice. D4, D9...
  • Page 5 3.1. Parts Diagram: Omega 200 Quantity varies according to model purchased. Specifications subject to change without prior notice. For more details on hardware, please see the corresponding ‘Hardware Reference Diagram’. Pre-assembled body unit includes the following individual parts:...
  • Page 6 3.2. Hardware Reference Diagram: Omega 200 Specifications subject to change without prior notice. D4, D9 D5, D9 D6, D9, D10, D11 D7, D9...
  • Page 7 4.1. Parts Diagram: Omega 300 Quantity varies according to model purchased. Specifications subject to change without prior notice. For more details on hardware, please see the corresponding ‘Hardware Reference Diagram’. Pre-assembled body unit includes the following individual parts: B9 B14...
  • Page 8 4.2. Hardware Reference Diagram: Omega 300 Specifications subject to change without prior notice. D4, D9 D5, D9 D6, D9, D10, D11 D7, D9...
  • Page 9 Please read the Important Information section carefully before assembly and use of your barbecue.  Omega 100  Omega 200  Omega 300 NOTE: The warming rack is not supplied for Omega 100 and Omega 200  Omega 100  Omega 200  Omega 300 Omega 100 and Omega 200...
  • Page 10  Omega 100  Omega 200  Omega 300 Omega 100 and Omega 200 Omega 300 Ensure that the legs with the Velcro attached to them are at the front of the barbecue, facing inwards.  Omega 100  Omega 200 ...
  • Page 11  Omega 100  Omega 200  Omega 300  Omega 200, Omega 300 users: skip this step and proceed directly to step 7.  Omega 100  Omega 200  Omega 300...
  • Page 12  Omega 100  Omega 200  Omega 300  Omega 100 users: skip this step and proceed directly to step 8. Omega 300 Omega 200  Omega 100  Omega 200  Omega 300...
  • Page 13 Omega 200, Omega 300 users: skip this step and proceed directly to step 10.  Omega 100  Omega 200  Omega 300  Omega 100 users: skip this step and proceed directly to step 13.  Omega 200 users: perform this step for both left and right side shelves.
  • Page 14  Omega 200  Omega 300  Omega 100, Omega 200 users: skip this step and proceed directly to Step 13. D6 D10 D11 D9  Fit the side burner venturi tube over the gas valve outlet. This is a loose fit and not a gas tight seal.
  • Page 15  Omega 100  Omega 200  Omega 300  Insert grease cup into wire cup holder.  Omega 100  Omega 200  Omega 300 NOTE: The warming rack is not supplied for Omega 100 and Omega 200...
  • Page 16  Omega 100  Omega 200  Omega 300 NOTE: The warming rack is not supplied for Omega 100 and Omega 200  Omega 100  Omega 200  Omega 300 NOTE: The warming rack is not supplied for Omega 100 and Omega 200...
  • Page 17: Leak Testing

    Retighten all joints Repeat test If bubbles form again do not use the barbecue and contact your local Outback distribu- tor for assistance. Always wipe the mixed solution (½ water and ½ liquid detergent / soap) from all joints and...
  • Page 18: Gas, Regulator And Hose

    6. Important Information leak test. This is the only safe and sure way to detect any gas leaking from joints and connections of the barbecue after assembly. Please read these instructions carefully before assembly and use of your barbecue.  Leak test annually, and whenever the gas bottle is removed or replaced.
  • Page 19: Installation

    WARRANTY. Please consult your local gas of heat and damage the barbecue. This is dealer for the most suitable gas bottles and not covered by warranty. regulators. 9.2. Preparation Before Cooking To prevent foods from sticking to the cooking 8. Installation surface, please use a long handled brush to apply a light coat of cooking or vegetable oil 8.1.
  • Page 20 After the right portion of the burner is lit, light is opened during cooking please allow extra the remaining portion of the burner. time for the barbecue to regain its temperature If burner fails to ignite, contact your local and complete the cooking. Use the temperature gauge (if applicable) to monitor the heat of the dealer for assistance.
  • Page 21: Care And Maintenance

    Failure to do this may result in a fat barbecue covers and other accessories are fire, which may cause injury and could seriously available from your local Outback® stockist. damage the barbecue. Even when your barbecue is covered for its...
  • Page 22 Replacement lava rock is periods storage follow cleaning available from your local Outback® stockist. procedures. 10.5. Grease Cup After every use, empty and clean the grease cup of any fat or food particles, using a plastic or wooden scraper if necessary.
  • Page 23: Technical Specifications

    37 mbar Propane Burner 359BL239 0.74mm 30 mbar LPG mixture Gas Consumption: Omega 100: 446g/hr Omega 200: 446g/hr Omega 300: 446g/hr Side Burner: 165g/hr Countries of Use: BE, CH, CY, CZ, ES, FR, GB, GR, IE, IT, LT, LU, LV, PT,...
  • Page 24: Troubleshooting

    12. Troubleshooting Problem Possible Cause Solution Burner will not light using the LP gas bottle is empty Replace with full bottle ignition system Faulty regulator Have regulator checked or replaced Obstructions in burner Clean burner Obstructions in gas jets or gas hose Clean jets and gas hose Electrode or ignition button wire is Reconnect wire...

This manual is also suitable for:

Omega 200Omega 300

Table of Contents