Advertisement
Appendix
The gauge card enables screen display, after printout, of the percentage of remaining ink ribbon.
+
The front cover being open, locate the gauge
card housing (7).
7
+
Remove the worn gauge card (8) from its
housing.
10
+
Insert the new gauge card (9) into its hou-
sing. Make sure the chip (10) of the gauge
card (9) is upwards, bevelled corner to the
top left side.
7
+
Push downward on the gauge card housing to
unlock it: it opens automatically, letting you
access the worn gauge card.
8
+
Remove the new (pre-cut) gauge (9) from the
ribbon gauge card (8).
9
+
Close the flap of the gauge card housing by
rotating it. Once into place, push it upward to
block it. Close the cover and replace the
handset.
Introduction
Telephoning
1
Directory
2
Settings
3
Fax
9
4
TAD
5
Printing
6
Doc control
7
Advanced
functions
Options
Appendix
43
Advertisement
